Limitation For 1027A-Z/X1027A-Z; Limitation For 4447A-Z/X4447A-Z; Patches For Emulex Pci Express (Pcie) Adapters - Fujitsu SPARC Enterprise M3000 Product Notes

If you switch the mode while using the RCI or the automatic power control, the
system power is controlled as follows.
TABLE 4-1
Function
RCI
APCS
To use the RCI function, see the SPARC Enterprise
M3000/M4000/M5000/M8000/M9000 Servers RCI Build Procedure and the SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI User's Guide.
To use the APCS, see the Enhanced Support Facility User's Guide for Machine
Administration Automatic Power Control Function (Supplement Edition).

Limitation for 1027A-Z/X1027A-Z

For 1027A-Z/X1027A-Z, PCIe Dual 10 Gigabit Ethernet Fiber XFP cards, this
maximum limit apply:
No more than one card in an M3000 server.
■

Limitation for 4447A-Z/X4447A-Z

For PCIe Quad-port Gigabit Ethernet UTP Low Profile Adapter (4447A-Z/
X4447A-Z), this maximum limit apply:
No more than four cards in an M3000 server.
■

Patches for Emulex PCI Express (PCIe) Adapters

The following Emulex PCIe adapters require drivers supplied in patch 120222-26:
Sun StorageTek Enterprise Class 4Gb Dual-Port Fibre Channel PCIe HBA
■
(XSEFC402AF)
Sun StorageTek Enterprise Class 4Gb Single-Port Fibre Channel PCIe HBA
■
(XSEFC401AF)
78 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1112 • May 2012
RCI and APCS Control with Mode Switch
Mode Switch
Locked
Remote power-on/power-off op-
erations are enabled.
Automatic power-on/power-off
operations are enabled.
Service
Remote power-on/power-off op-
erations are disabled.
Automatic power-on is disabled,
but power-off remains enabled.