Abus TVAC16000C User Manual page 24


Motion detection

Alarm alerts via email
Here you can set the sensitivity of the motion
detection for each camera.
You can choose between "Low", "High" and "Off".
High: Motion detection with high sensitivity
Low: Motion detection with low sensitivity
Off: Motion detection is off. Motion is not recorded.
You can have an alarm alert sent to you via email
as soon as the camera detects any motion.
Proceed as follows:
Select "Enable".
1.
Select "Disable" to switch this function off
again and you will not receive an email for
motion detection.
2. Enter your SMTP server (outgoing mail
server) for your email provider.
e.g. mail.gmx.net or smtp.gmail.com
3. Enter the corresponding port
e.g. 465
The outgoing mail server and the
corresponding port can be found on your
email provider's website.
4. Enter your email address
5. Enter the password for your email account
6. Enter the email address to which the alarm
alert should be sent.
The two email addresses can be different.
7. In the event of motion detection, you receive
an email with the following message:
"Motion detected by your security system."
To enable this function, the monitor must be in
the docking station and connected to the internet.
Please note that you only receive an email to
inform you that motion has been detected. You do
not receive a picture or a live view. You can then
view the recording on the SD card or go to the live
view via the app.
If you have not received an e-mail, please
check your spam folder.
24
English