Equinox Systems CARINA User Manual page 4

Equinox Carina Laser
You should find inside the Laser carton the following items:
1, Pegasus Laser
3, DMX cable
Technical Specifications:
Voltage: 240V AC 50Hz
Laser diode: 50mW Green (532nm) DPSS laser
Operating modes: 1, Stand Alone Sound Activated
Features:
Over 50 laser patterns, with adjustable scan rate, position and size giving a total of over 200
effects.
Function Settings:
1, Stand Alone Sound Activated, set all dip switches to off. Then use the
sensitivity control to set the desired activation level.
2, Stand Alone Auto Programme change, set dip switch 10 to on and all others to off.
Turn the sensitivity control to full on, the unit will then scroll through it's internal patterns.
3, Master/Slave mode. To set the unit as Master use the Sound or Auto mode as above.
For Slave mode operation, set dip switch 1 to on and all others to off
4, For DMX operation set dip switch 10 to off, then set the desired address using dip
switches 1 - 9
When used in DMX mode please note:
Set Channel 1 to DMX No: 0 to 50 for sound active mode.
Set Channel 1 to DMX No: 51 to 101 then using Channel 2 you can scroll through the 58 patterns
as listed below.
Set Channel 1 to DMX No: 102 to 152 then using Channel 3 you can obtain the single shapes
listed. With the single shapes selected you can then use
- Channel 4 to zoom
- Channel 5 for rotation
- Channel 6 for X movement
- Channel 7 for Y movement
- Channel 8 for scan speed
Set Channel 1 to DMX No: 153 to 203, the laser will then go into Auto run mode
Set Channel 1 to DMX No: 204 to 255, the laser will then go into blackout mode.
Note: The maximum number of units that can be linked in Master/Slave mode is 32. The patterns
are not perfect (squares, circles, triangles etc) as the unit uses stepper motors and not Galvo's but
are ideal for use with smoke machines and to make lines and tunnels etc.
When using long DMX runs or multiple heads. A DMX terminator plug should be used on the last
head in the chain.
2, Power cable
4, Instruction manual
2, Stand Alone Auto programme
3, Master/Slave
4, DMX-512 8 channels
Technical specifications