Printing Using The E-Mail Port Monitor - Oki ES3640E Printing Manual

9
9-114 Using Fiery E-mail Service
command, the ES3640e MFP returns an e-mail response.
To manage print jobs with Job Control
1. In your e-mail application, enter the ES3640e MFP e-mail address
in the To: line.
2. Enter one of the following Job Control commands in the Subject
line.
3. To check the status of a job, enter #JobStatus<job id> in the
Subject line.
You will receive a reply to your job status query. You can only
inquire about the status of the job if you sent the job or are an
administrator.
To cancel a job, enter #CancelJob<job id> in the Subject line.
You will receive a notification indicating that the job has been
cancelled and will not print to the ES3640e MFP. You can only
cancel the job if you sent the job or are an administrator.
To inquire help, enter #Help in the Subject line.
You will receive an e-mail response that contains the links that
allow you to cancel jobs, check job status, and search and
manage address books. Click any of the links to perform a Job
Control command.

Printing using the E-mail Port Monitor

Once you set up the E-mail Port Monitor, you can print using
E-mail Service in the same manner as any other printing method.
No additional steps are necessary.
The E-mail Port Monitor is only supported on Windows
Note:
computers. Also, Direct connection is not supported when printing
with E-mail Port Monitor.
ES3640e MFP EFI Printing Guide - 114