Oki ES3640E Printing Manual page 121

A
A-121 Where to set print options
Option and settings
(default setting is
underlined)
Booklet Imposition
Off/Booklet
Brightness
Printer's default/85%
Lightest/90% Lighter/95%
Light/
100% Normal/105% Dark/
110% Darker/115% Darkest
CMYK Simulation Method
Printer's default/Quick/
Full (Source GCR) /Full
(Output GCR)/
With CRD
Description
Specify to arrange the pages of
your job in special layouts for
folding or cutting after printing.
Select 85% for a substantially
lighter image, 115% for a
substantially darker image, or
use one of the settings in
between.
Select Quick to use
one-dimensional transfer
curves to adjust density output
of individual color channels.
Select Full (Source GCR) for a
more complete and accurate
simulation by applying
colorimetric transformations
that adjust hue as well as
output density. This option
produces output that maintains
the same amount of black as
the source document.
Select Full (Output GCR) to
apply the same simulation
method as Full (Source GCR),
except that the output
produced contains a black
amount determined by the
output profile.
ES3640e MFP EFI Printing Guide - 121
Requirements, constraints,
and information
For more information, see
page A-131.
The Printer's default setting
produces the same result as
the 100% setting.
The Printer's default setting
reflects the setting specified in
Setup.
For Windows, choose Expert
Color as the Color Mode to
access this option.
For more information, see
Chapter 1 of the Color Guide.