Figure 6.7 Distribution Panel (Free-Standing); Figure 6.8 Distribution Panel (Wall-Mounted); Distribution Panel Structure - Fujitsu M10 Series Installation Planning Manual

CHAPTER 6 Power Supply Facilities
6.5.3

Distribution panel structure

A distribution panel uses an output terminal strip to connect a power cable to each
device. Figure 6.7
output terminal boards.
The distribution panel structures and output terminal boards are described below:
(1) Output terminal board position
Normally, breakers are in the upper part of the distribution panel, and output terminal
boards are in the lower part so that connecting cables can be easily drawn from the
output terminal boards to under the free-access floor.
84
and Figure 6.8

Figure 6.7 Distribution panel (free-standing)

Figure 6.8 Distribution panel (wall-mounted)

show typical distribution panel setups having
C120-H007-08EN