Deactivating The Buttons On The Unit (Child Lock); Setting The Automatic Standby Function; Updating The Software - Sony MHC-V44D Operating Instructions Manual

Deactivating the
buttons on the unit
(Child Lock)
You can deactivate the buttons on the
unit (except ) to prevent
misoperation, such as child mischief.
Hold down  on the unit for more
than 5 seconds.
"CHILD LOCK ON" appears in the
display panel.
You can only operate the system using
the buttons on the remote control.
To cancel, hold down  on the unit for
more than 5 seconds until "CHILD LOCK
OFF" appears in the display panel.
Notes

Child Lock function will be canceled
when you disconnect the AC power cord
(mains lead).

Child Lock function cannot be activated
when you open the disc tray.
Setting the automatic
standby function
The system enters standby mode
automatically in about 15 minutes
when there is no operation or audio
signal output.
By default, the automatic standby
function is turned on.
1
Press OPTIONS.
2
Press
"AutoSTBY", then press
3
Press
"ON" or "OFF".
To exit the options menu, press
OPTIONS.
44 GB
/ repeatedly to select
/ repeatedly to select
Notes

"AutoSTBY" flashes in the display panel
about 2 minutes before entering
standby mode.

The automatic standby function does
not work in the following cases:
 during tuner function.
 when the Sleep Timer is activated.
 when microphone is connected.

Updating the software

The software of this system may be
updated in the future. You can update
the software from the websites below.
For customers in Latin America:
<http://esupport.sony.com/LA>
For customers in Europe and Russia:
<http://www.sony.eu/support>
For customers in Asia Pacific:
<http://www.sony-asia.com/support>
Follow the online instructions to update
the software.
.