Sony MHC-V44D Operating Instructions Manual page 53

Messages
One of the following messages may
appear or flash in the display panel
during operation.
CANNOT PLAY

A disc that cannot be played back
was inserted.

A DVD VIDEO with unsupported
region code was inserted.
CODE 01
SGNL ERR
An unsupported audio signal is input
from the connected TV's HDMI IN (ARC)
jack (page 17).
DATA ERROR

The file does not conform to the
required format.

The file extensions does not match
the file format.
DEVICE ERROR
The USB device could not be
recognized or an unknown device is
connected.
DEVICE FULL
The memory of the USB device is full.
ERASE ERROR
Erase of audio files or folders on the
USB device failed.
FATAL ERROR
The USB device was removed during
transfer or erase operation, and may
have been damaged.
FOLDER FULL
You cannot transfer onto the USB
device because the number of folder
has reached its maximum.
GUEST
The system becomes a Party Guest
when Party Chain function is activated.
HOST
The system becomes a Party Host
when Party Chain function is activated.
NoDEVICE
No USB device is connected or
unsupported device is connected.
NO DISC
There is no disc on the disc tray.
NO MUSIC
MP3/WMA/AAC/WAV data does not
exist in MUSIC playback mode.
NO SUPPORT
An unsupported USB device is
connected or the USB device is
connected through a USB hub.
NO VIDEO
MPEG4/Xvid data does not exist in
VIDEO playback mode.
NOT USE
You tried to perform a specific
operation under conditions where that
operation is prohibited.
OVER CURRENT
An over current from the
was detected.
PROTECT
The USB device is write-protected.
PUSH STOP
You tried to perform an operation that
can be performed only when the
playback is stopped.
READING
The system is reading information of
the disc or USB device. Some
operations are not available.
REC ERROR
The transfer did not start, stopped
partway, or otherwise could not be
performed.
TRACK FULL
You cannot transfer onto the USB
device because the number of file has
reached its maximum.
(USB) port
53 GB