Other Operations; Using The Control For Hdmi Function - Sony MHC-V44D Operating Instructions Manual

Other Operations

Using the Control for
HDMI function
Connecting a TV compatible with the
Control for HDMI function* by HDMI
cable (High Speed HDMI Cable with
Ethernet, not supplied) enables you to
easily operate the device by a TV
remote control.
The following functions can be used
with the Control for HDMI function.

System Power Off function

System Audio Control function

Audio Return Channel
 One-Touch Play function

Remote Easy Control
 Language Follow
* Control for HDMI is a standard used by
CEC (Consumer Electronics Control) for
allowing HDMI (High-Definition
Multimedia Interface) devices to control
each other.
Note
These functions may work with devices
other than those manufactured by Sony,
but operation is not guaranteed.
Preparing to use the
Control for HDMI function
Set [HDMI SETUP] – [CONTROL FOR
HDMI] on the system to [ON] (page 28).
The default setting is [ON].
Enable the Control for HDMI function
settings for the TV connected to the
system.
Tip
If you enable the Control for HDMI
("BRAVIA" sync) function when using a TV
manufactured by Sony, the Control for
HDMI function of the system is also
enabled automatically. When settings are
completed, "COMPLETE" appears in the
display panel.
System Power Off function
When you turn off the TV, the system
will turn off automatically.
Set [HDMI SETUP] – [STANDBY LINKED
TO TV] on the system to [ON] or [AUTO]
(page 28). The default setting is
[AUTO].
Note
The connected device may not turn off
depending on the status of the device.
System Audio Control function
If you turn on the system while you are
watching the TV, the TV sound will be
output from the speakers of the
system. The volume of the system can
be adjusted using the TV's remote
control.
If the TV sound was output from the
speakers of the system the previous
time you watched the TV, the system
will be turned on automatically when
you turn on the TV again.
Operations can also be made by the
TV's menu. For details, refer to the
operating instructions of your TV.
Notes

The system's volume level is displayed
on the TV screen depending on the TV. It
may differ from the volume level on the
display panel.

Depending on the settings of the TV, the
System Audio Control function may not
be available. For details, refer to the
operating instructions of your TV.
Audio Return Channel
If the system is connected to a TV's
HDMI IN jack compatible with Audio
Return Channel, you can listen to TV
sound from the speakers of the system
without connecting an audio cable
(not supplied).
On the system, set [HDMI SETUP] –
[AUDIO RETURN CHANNEL] to [ON]
(page 28). The default setting is [ON].
39 GB