Sony MHC-V44D Operating Instructions Manual page 46

Hide thumbs Also See for MHC-V44D:
Table of Contents

Advertisement

There is severe hum or noise.
Move the system away from sources
of noise.
Connect the system to a different
wall outlet.
Install a noise filter (commercially
available) to the AC power cord
(mains lead).
Turn off surrounding electrical
equipment.
You can hear a noise from cooling fan
when the system is playback at low
volume. This is not a malfunction.
The remote control does not
function.
Remove the obstacles between the
remote control and the unit.
Move the remote control closer to
the unit.
Point the remote control at the unit's
sensor.
Replace the batteries (R03/size AAA).
Move the unit away from the
fluorescent light.
There is acoustic feedback.
Reduce the volume.
Move the microphone away from the
system or change the direction of the
microphone.
The color irregularity on a TV screen
persists.
Turn off the TV at once, then turn it
on after 15 to 30 minutes. If the color
irregularity still persists, place the
system farther away from the TV.
"CHILD LOCK" appears when you
press any button on the unit.
Set the Child Lock function to off
(page 44).
A clicking sound is heard when
turning the power on.
This is the operating sound and it
occurs when the power is turned on
or off, for example. This is not a
malfunction.
46
GB
Disc player
The disc tray does not open and
"LOCKED" appears in the display
panel.
Consult your nearest Sony dealer or
local authorized Sony service facility.
The disc tray does not close.
Load the disc correctly.
The disc does not eject.
You cannot eject the disc during
CD-USB Synchronized Transfer or
REC1 Transfer. Press  to cancel the
transfer, then press  on the unit to
eject the disc.
Consult your nearest Sony dealer.
Playback does not start.
Wipe the disc clean (page 54).
Reload the disc.
Load a disc that this system can play
back (page 8).
Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours
until the moisture evaporates.
The region code on the DVD VIDEO
does not match the system.
The sound skips.
Wipe the disc clean (page 54).
Reload the disc.
Move the unit to a place with no
vibration.
Playback does not start from the first
track.
Set the play mode to Normal Play
(page 22).
Resume Play has been selected.
Press  twice. Then, press  to start
playback.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents