Table of Contents
Advertisement
Section 3 - Configuration
If an event occurs, such as motion detection, or a hard disk failure, the NVR can
be configured to send an email notification to one or more email addresses.
Here you can configure the e-mail notification settings.
Sender Email
Input the sender's e-mail address.
Address:
Server
Enter the SMTP (Simple Mail Transport Protocol) server IP address.
Address:
User Name:
Enter the user name for your SMTP account.
Password:
Enter the password for your SMTP account.
Port:
Enter the port used by your SMTP server. Tick the checkbox here if the
e-mail server uses the SSL protocol.
Test:
Click this button to send a test email and verify whether the settings
are correct.
Adding Contacts
Step 1: Insert the name of a new contact to receive notifications.
Step 2: Insert the e-mail address of this contact.
Step 3: Click Add.
D-Link DNR-2020-04P User Manual
Event
E-Mail Settings
36
Advertisement
Table of Contents
