Table of Contents
Advertisement
Section 3 - Configuration
The Audio tab has the following settings:
Audio Format:
Select from supported audio formats (G.711, G.726, AAC).
Enable
Turn on/off the microphone on the camera (if supported).
Microphone:
Audio-in Gain
Select the audio-in gain level for the microphone.
Level:
Enable
Enable audio out on the camera (if supported).
Speaker:
Audio Out
Adjust the volume of the camera's speaker.
Volume Level:
The Image tab has the following settings:
Brightness:
Adjust the brightness.
Contrast:
Adjust the contrast.
Saturation:
Adjust the saturation.
Sharpness:
Adjust the sharpness.
Note: For some IP cameras, the NVR supports motion detection.
D-Link DNR-2020-04P User Manual
32
Advertisement
Table of Contents
