Event - D-Link DNR-322L User Manual

Section 4 - Configuration
If an event occurs, such as motion detection, or hard disk failure, you
will receive an e-mail notification. Here you can configure your e-mail
notification settings.
Sender Input the sender's e-mail address.
Email
Address:
Server SMTP (Simple Mail Transport Protocol) server IP address.
Address:
User Name: Enter the user name for your SMTP account.
Password: Enter the password for your SMTP account.
Port: Enter the port used by your SMTP server. Tick the checkbox here this if
your e-mail server uses SSL protocol.
Test: Click this button and the system will send a test mail to verify whether
your settings are correct.
Adding Contacts
Step 1: Insert the name of a new contact.
Step 2: Insert the e-mail address of this new contact.
Step 3: Click Add.
D-Link DNR-322L User Manual

Event

E-Mail Settings
46