Table of Contents
Advertisement
Section 2 - Installation
You can setup your NVR without using a PC by connecting a VGA or HDMI
display to the respective ports on the back of the device. To control the
Graphical User Interface (GUI), connect a USB mouse to the USB port on the
front panel.
The default username of the NVR is admin and the default password is blank.
You can customize the password and configure NVR settings by clicking on
the setup wizard icon
and following the on-screen instructions.
D-Link DNR-2020-04P User Manual
Configuring Your DNR-2020-04P
13
Advertisement
Table of Contents
