Table of Contents
Advertisement
Section 1 - Product Overview
1
HD1 LED
2
HD2 LED
3
LAN LED
4
Power LED
5
Power Button
6
USB 2.0 Port
D-Link DNR-2020-04P User Manual
Hardware Overview
Front View
1
2
A solid green light indicates that the hard drive is installed properly. This light will blink during the
read/write process. If the light is red, the hard drive is installed but has failed.
A solid green light indicates that the hard drive is installed properly. This light will blink during the
read/write process. If the light is red, the hard drive is installed but has failed.
A solid green light indicates that the device is connected to your network. This light will blink
during data transfer. If the light is off, the device is not connected to your network.
A solid green light indicates the device is powered on. This light will blink during bootup. If the
power LED is off, the device is not powered on.
Push this button for one second to power on the device or for 5 seconds or more to power off.
Connect a mouse to control the management UI when a monitor is connected via HDMI or VGA.
This port is used for firmware updates, video exports to USB drives, and backups. Connection to a
USB mouse/keyboard is supported.
3
4
5
6
7
Advertisement
Table of Contents
