Setting The Lcd Backlight - Yamaha EMX7 Owner's Manual

System Setup
5.
Press the [MENU/CONTROL] rotary encoder
to confirm your selection.
NOTE
If you wish to return to the MENU screen, turn the [MENU/
CONTROL] rotary encoder until the cursor highlights the
MENU button, and press the [MENU/CONTROL] rotary
encoder to confirm your selection.
18
EMX7 Owner's Manual

Setting the LCD Backlight

1.
Call up the SYSTEM SETUP screen. (For more
information about the screen procedures, see
page 15.)
SYSTEM SETUP screen
2.
Turn the [MENU/CONTROL] rotary encoder
until the cursor highlights the BACKLIGHT
parameter box.
Parameter box
3.
Press the [MENU/CONTROL] rotary encoder
so that the parameter box is fully highlighted.
4.
Turn the [MENU/CONTROL] rotary encoder to
set the Backlight parameter. The brightness
can be set to any value from 0 to 3, providing
4 different brightness levels.
5.
Press the [MENU/CONTROL] rotary encoder
to confirm your selection.
NOTE
If you wish to return to the MENU screen, turn the [MENU/
CONTROL] rotary encoder until the cursor highlights the
MENU button, and press the [MENU/CONTROL] rotary
encoder to confirm your selection.