Spare parts Connection to the mains supply Disposal information Thank you for purchasing your Russell Hobbs Compact Cyclonic Upright Vacuum Cleaner. To get the best from your new cleaner, take a few moments to read these instructions and keep them in a safe place for future reference.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts.
Page 4
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE • Do not direct at people, animals, electrical outlets, or equipment containing electrical components. • Unplug from outlet when not in use. Do not leave the cleaner unattended while plugged in. •...
Page 5
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • Do not let the cord hang over the edge of the worktop, or touch hot surfaces. • Do not use this vacuum to pick up water or any other liquids, combustible substances or hot/burning objects.
Page 6
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE • When cleaning stairs to prevent the vacuum cleaner falling always place the vacuum cleaner at the bottom of stairs on the floor. Do not place the vacuum cleaner on stairs or furniture.
1. Energy rating – based primarily on energy consumption and pick-up. 2. Annual energy RHUV3002 usage – the amount of energy used over a year. 3. Emissions – the amount of dust in the air emitted from the machine’s exhaust.
TECHNICAL DATA (PRODUCT FICHE) Trade mark Russell Hobbs Model RHUV3002 Energy efficiency class Annual energy consumption 27.2 (kWh/year) Carpet cleaning performance class Hard floor cleaning performance class Dust re-emission class Sound power level Rated input power 700W...
VACUUM CLEANER ASSEMBLY Before using your vacuum cleaner Remove all packaging and lay out the separate components. Check the unit after unpacking for any visual damage such as: • Misaligned or damaged parts • Damage to the main body and separate components •...
Page 11
VACUUM CLEANER ASSEMBLY Ensure the unit is unplugged before assembling. Locate the screw that comes in the box with your product. 1. Lower the handle onto the main body of the vacuum and press down. 2. Place the screw in the hole and tighten with a Philips screw driver.
Page 12
VACUUM CLEANER ASSEMBLY 5. The combination crevice tool is stored on the vacuum cleaner, located above the brush hose inlet. The base of the tool slides onto the stand as per the diagram. 6. When using the hose to clean areas other than the floor, lift the hose from the brush hose inlet.
USING YOUR VACUUM CLEANER Once the vacuum cleaner is assembled and ready for use: 1. Twist the quick cord release. 2. Plug the cable into a wall socket and press the switch on. 3. Rest your foot on the vacuum head and pull the handle back towards yourself.
CLEANING AND CARE: EMPTYING THE DUST CONTAINER When the dust container reaches the ‘MAX’ line fill, it will need to be emptied. 1. To remove the dust container, press the release button on the head and pull away/upwards from the unit 2.
Page 15
CLEANING AND CARE: CLEANING THE FILTER With frequent use you need to clean the filters in order to maintain peak performance and lengthen product life span. To remove the dust container, press the release button on the lid handle and pull away/upwards from the unit.
Page 16
CLEANING AND CARE: CLEANING THE FILTER Repeat steps 1 and 2 on the previous page. 3. Lift out the cone filter. 4. Rinse the cone filter under the tap. 5. Leave to fully dry for at least 24 hours before placing back in the container. To place back into the container, lower inside the dust canister.
Page 17
CLEANING AND CARE Before you clean the appliance, disconnect the mains plug from the wall socket. To clean the exterior of the device, use a damp, soft cloth and mild detergent. NEVER IMMERSE THE VACUUM IN WATER. Wash non-electrical removable accessories in warm soapy water and allow to dry thoroughly before next use.
PROBLEM SOLVING PROBLEM POSSIBLE PROBLEM POSSIBLE SOLUTION Power cord/plug damage Check the power cord and plug for signs of damage. The vacuum cleaner is plugged in but does not work Fuse is damaged Check and replace the fuse in the plug. Dust container Check if the dust container is full, if so, empty it.
GUARANTEE AND CUSTOMER SERVICES At Russell Hobbs, we take all our customer feedback seriously. Feel free to contact our Product Care Team, on 0345 209 7461 Monday – Friday: 8am-8pm & Saturday: 9am – 1pm, who will be more than happy to assist you.
SPARE PARTS To check the availability of the following spare parts, simply contact our friendly Customer Services team using the details provided at the bottom of this page. Lid Filter Floor Head Filter 3 in1 Crevice Tool For Customer Services & Spare Parts please call 0345 209 7461 Opening times: Monday - Friday 8am –...
CONNECTION TO THE MAINS SUPPLY This appliance is designed to operate from a mains supply of 220-240V~ 50/60Hz. Check that the voltage marked on the product corresponds with your supply voltage. How to change the fuse 1. Slot the end of a screwdriver into the recess in the fuse holder of the plug.
Page 24
Opening times: Monday - Friday 8am – 8pm & Saturday 9am –1pm Or visit us at www.productcare.co.uk Revision 7.1 Model: RHUV3002 Made by G2S Ltd under license. G2S Limited, Wigan, WN2 4AY This symbol is known as the 'Crossed-out wheelie bin Symbol'.
Need help?
Do you have a question about the RHUV3002 and is the answer not in the manual?
Questions and answers