Philips Sonicare FlexCare Platinum HX9112/27 User Manual page 37

1 After brushing, rinse the brush head for 15
seconds and shake off excess water.
Do not place the travel cap on the brush head
during sanitisation.
2 Let the brush head to dry in open air for 2
minutes.
3 Place your finger in the door recess on top of
the sanitiser and pull open the door.
4 Place the brush head on one of the 2 pegs in
the sanitiser with the bristles facing the light
bulb.
Note: Only clean Sonicare snap-on brush heads in the
sanitiser.
Note: Do not clean Sonicare for Kids brush heads in
the sanitiser.
5 Put the plug of the sanitiser in the wall socket.
6 Close the door and press the green power on/
off button once to select the UV clean cycle.
Note: You can only switch on the sanitiser if the door is
closed properly.
Note: The sanitiser stops if you open the door during
the sanitising cycle.
Note: The sanitiser cycle runs for 10 minutes and then
shuts off automatically.
, The sanitiser is in operation when the light
glows through the window.
36
ENGLISH