Philips Sonicare FlexCare Platinum HX9112/27 User Manual page 33

ENGLISH
Intensity levels per mode
- Low: 1 LED indicator light.
- Medium: 2 LED indicator lights.
- High: 3 LED indicator lights.
Note: to adjust the intensity level to the next higher
or lower level, you can press the + button to increase
intensity or the - button to decrease intensity at any
time during the brushing cycle.
Pressure Sensor
A change in vibration (and a slight change in sound)
alerts you when you apply too much pressure while
brushing. See chapter 'Features'.
Battery status (when handle is not on
charger)
- 1 yellow LED indicates a low charge.
- 3 green LEDs indicate a full charge.
Note: If you hear a long beep and the yellow LED of
the battery level indicator flashes, your toothbrush
is completely empty and switches off. Place the
toothbrush on the charger to recharge it.
Note: To keep the battery fully charged at all times, you
may keep your Sonicare on the charger when not in
use.
Features
Pressure Sensor
This Sonicare type comes with the Pressure Sensor
feature activated. The Pressure Sensor works in all 3
modes and at all 3 intensity levels.
32