Philips Sonicare FlexCare Platinum HX9112/27 User Manual page 34

ENGLISH
1
2
4
3
To deactivate or reactivate the Pressure Sensor
feature:
1 Place the handle with a brush head attached on
the plugged-in charger or sanitiser.
2 Press and hold the power on/off button and
the mode button for 2 seconds.
, You hear 1 beep to indicate that the Pressure
Sensor has been deactivated.
, You hear 2 beeps to indicate that the Pressure
Sensor has been activated.
Quadpacer
- The Quadpacer is an interval timer that has a
short beep and pause to remind you to brush
the 4 sections of your mouth. Depending on the
brushing mode you have selected, the Quadpacer
beeps at different intervals during the brushing
cycle. The Quadpacer works in all 3 modes and at
all 3 intensity levels.
The Quadpacer feature on this type has been
activated. To deactivate or reactivate the Quadpacer
feature:
1 Place the handle with a brush head attached on
the plugged-in charger or sanitiser.
2 Press and hold the mode button for 2 seconds.
, You hear 1 beep to indicate the Quadpacer has
been deactivated.
, You hear 2 beeps to indicate the Quadpacer has
been activated.
Smartimer
The Smartimer indicates that your brushing cycle
is complete when it automatically switches off the
toothbrush at the end of the brushing cycle.
33