Steeping Tea - Fakir CEREMONY DIGITAL Instruction Manual

GB

Steeping tea

24
USAGE
• Connect the power cord to a grounded socket.
• It would be convenient for you to keep this unit plugged in
the kitchen when not in use, provided that the switch is
turned off.
• Fill the kettle with water between the maximum level and
the minimum level, according to the quantity of tea you
want to steep.
• Place the kettle over the power base unit.
• Open the teapot lid, take out the tea filter from its place,
put an adequate amount of tea in the filter and locate it
inside of the teapot after wetting it with cold water.
• Once pressing the on off button, appliance is opened,
water boils and keep warm function starts automatically.
Temperature setting button (Prog) is for setting the
degrees 40°C, 60°C, 80°C and water become warm at
chosen degree and automatically keep warm the water.
During boiling, red pilot light will be on.
• Depending upon the quantity of water put into the kettle,
the water will boil within 3 to 8 minutes, then you will hear
again a beeping sound twice and the appliance switches
automatically to "keep warm" function by decreasing the
heating power to keep the water at the boiling state to
ensure energy saving.
• Steep the tea using boiled water and relocate the teapot in
its place. Add some water to the kettle if necessary. When
cold water added to the kettle, turn keep warm button on, it
starts boiling again.
Special Feature
• Pull the tray in the base of the teamaker. Excess water on
the base of teapot can be wiped, teapot can be put there
while waiting to cool down for herbal tea or to avoid putting
teapot on bench.