Usage; Filling With Water - Fakir CEREMONY DIGITAL Instruction Manual

Usage

Filling with water

USAGE
• Tea maker heats up during operation; for this reason, do
not touch the hot surfaces of the appliance. Keep your
hands away from the spout when the water starts boiling.
• Do not use for any purpose other than boiling water. Do
not fill with any other liquids or solutions.
• Before using for the first time, wash the inside of your tea
maker by putting water inside. Boil water two to three times
inside of the kettle, and replace the water after each
boiling. Make sure that device is filled with water up to the
maximum level when doing this. After each time of boiling,
pour out the hot water and rinse the inside of the device
with cold water.
• After boiling the water, some powder-like sediment may
form due to hardness of the water. This is quite natural and
has no adverse effects whatsoever on human health.
• Always remove the appliance from its power base unit
when filling with water, to prevent the water to be spilled
out on the tray.
• Do not fill with less than 0,5 liter of water or more than 2
liters of water.
• If you attempt to boil a quantity of water above the
maximum level, the boiling water may eject from the spout,
respectively.
GB
23