Table of Contents
Advertisement
Using the audio
To play sound from the projector, connect your source to the Audio In con-
nector on the projector.
To adjust the volume, use the buttons on the keypad or remote.
To mute the sound, press the Mute button.
Troubleshooting audio
If there is no sound, check the following:
•
Make sure the audio cable is connected.
•
Make sure mute isn't active.
•
Make sure the volume is turned up enough. Press the volume button
on the keypad or remote.
•
Make sure that if you are connected to Computer 1 on the back of the
projector, that you are also connected to the corresponding audio in. If
you are connected to Computer 2, be sure you are connected to its cor-
responding audio in.
•
Adjust the audio source.
•
If playing a video, make sure the playback has not been paused.
Connecting external speakers
The projector can be attached to external speakers that have their own
power source by plugging speaker cables into the projector's left and right
Audio Out connectors.
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
connect audio cable
adjust volume
external
speakers
24
Y
computer 1
audio in
computer 2
audio in
Pb
computer in
Pr
computer 1 and
corresponding audio
computer 2 and
corresponding audio
audio in
computer 1
computer 2
audio in
computer in
video
R
audio in
Y
computer 1
computer 2
s-video
monitor
network
R
Pr
audio in
audio in
L
computer in
audio out
serial control
L
Pb
audio out
speaker
cable
video
R
s-video
monitor out
network
R
audio in
L
serial control
L
audio out
Advertisement
Table of Contents
