Page 2
This is a Class A product. In a domestic environment it may cause radio interfer- ence, in which case the user may be required to take adequate measures. The typ- ical use is in a conference room, meeting room or auditorium. Downloaded From projector-manual.com Boxlight Manuals...
Page 3
Declaration of Conformity Manufacturer: B OXLIGHT 19332 Powder Hill Place, Poulsbo, Washington, USA We declare under our sole responsibility that the CD-600m and CD-750m projec- tors conform to the following directives and norms: EMC Directive 89/336/EEC, Amended by 93/68/EEC EMC: EN 55022...
Page 4
Downloaded From projector-manual.com Boxlight Manuals...
Basic Image Adjustment Adjusting the Projector Using the Remote Control Using the Keypad and Remote Buttons Using the On-Screen Menus Display Menu Audio Menu Image Menu Color Management Menu Control Menu Advanced Menu Language Menu Status Menu Downloaded From projector-manual.com Boxlight Manuals...
Page 6
Replacing the Projection Lamp Replacing the Batteries in the Remote Control Using the Security Lock Troubleshooting Appendix Specifications Accessories Portable and Laptop Activation Chart Using Video Mirroring with a PowerBook Computer Projected Image Size Index Downloaded From projector-manual.com Boxlight Manuals...
Warning: Refer all service to qualified service personnel. Ser- • vicing your own projector will void the warranty. See the fol- lowing page for the customer service contact information. Caution: Don’t block ventilation openings. • Downloaded From projector-manual.com Boxlight Manuals...
Page 8
Do not place objects in this area in front of the projector Customer Service If you need assistance, call B 1-800-762-5757 OXLIGHT 360-779-7901 Downloaded From projector-manual.com Boxlight Manuals...
Digital Light Processing™ (DLP) technology. They are easy to connect, easy to use, easy to trans- port, and easy to maintain. The CD-600m has native SVGA 800x600 resolution, the CD-750m has XGA 1024x768 resolution. The user interfaces of the two products are identical except where noted;...
Unpacking the Projector HDTV formats. The projector comes with the items shown in Figure 1. Check to make sure all are included. Contact Boxlight immediately if anything is missing. If you are experienced in setting up presentation systems, use the Quick Start card that was included in the shipping box.
Page 11
IGURE Shipping box contents Projector + lens cap Computer cable Soft carry case Audio cable adapter User’s Guide and quick start Audio cable card Power cord Composite video cable Remote control Downloaded From projector-manual.com Boxlight Manuals...
Page 12
IGURE Front view of projector keypad connector panel IGURE Back view of projector Downloaded From projector-manual.com Boxlight Manuals...
If this manual doesn’t answer your question, call B OXLIGHT 1-800-762-5757 360-779-7901 Warranty This product is backed by a limited two-year warranty. The details of the warranty are printed at the back of this manual. Downloaded From projector-manual.com Boxlight Manuals...
Page 14
Downloaded From projector-manual.com Boxlight Manuals...
“Projected Image Size” on jection screen. page 54. 20 ft./6.1m 12 ft./3.7m 5 ft./1.5m IGURE Projected image size at minimum zoom 3 Make sure the projector is unplugged and your computer is turned off. Downloaded From projector-manual.com Boxlight Manuals...
Page 16
2-VESA audio in monitor S-video video audio in (for all video sources) IGURE Connector panel on optional enhanced connectivity module to computer video to USB mouse to projector to computer IGURE Computer cable Downloaded From projector-manual.com Boxlight Manuals...
NOTE: You do not need to restart Now you’re ready to power up the projector and your laptop. your computer after connecting a Skip to “Powering up the Projector” on page 14. USB mouse to use it (it is hot-plug- gable). Downloaded From projector-manual.com Boxlight Manuals...
(Figure 10). audio adapter composite video cable audio cable IGURE Connecting the projector to a video player using the standard video cable (with com- posite video connector) and the audio cable and adapter Downloaded From projector-manual.com Boxlight Manuals...
Page 19
SECAM. It automatically adjusts to optimize its performance for may also have a “Video Out” con- the incoming video. nector for a coaxial cable connec- tion. DO NOT use this to connect to the projector. Downloaded From projector-manual.com Boxlight Manuals...
Connecting the optional connectivity module to the projector component RS-232 computer 1-M1 audio in wired remote video composite audio in computer 2-VESA monitor S-video video audio in (for all video sources) IGURE Connector panel on optional enhanced connectivity module Downloaded From projector-manual.com Boxlight Manuals...
Page 21
The module also provides wired remote input (used with an optional remote), monitor out (used to display images on your desktop computer’s monitor as well as on the projection screen), and RS-232 input (to control the projector from an LCD control panel). Downloaded From projector-manual.com Boxlight Manuals...
“new hard- ware” and the Add New Hardware Wizard appears. Follow these instructions to use the Wizard to load the correct driver (which was installed with your Windows operating system). Downloaded From projector-manual.com Boxlight Manuals...
Page 23
Click Next. Make sure “Search for the best driver” is selected, then click Next. Uncheck any checked boxes, then click Next. Windows automati- cally locates the driver. If this driver has been removed, reload the driver using your Windows operating system CD. Downloaded From projector-manual.com Boxlight Manuals...
Page 24
Window operating system CD. For Windows 2000 and Windows ME: a The USB drivers for mouse control are automatically installed. For a Macintosh computer running Mac OS X: a The USB drivers for mouse control are automatically installed. Downloaded From projector-manual.com Boxlight Manuals...
Unplug the power cord to com- 1 minute while the lamp cools pletely power off the projector. before unplugging the projector. The Lamp LED will light green when the lamp has cooled. Downloaded From projector-manual.com Boxlight Manuals...
Page 26
Downloaded From projector-manual.com Boxlight Manuals...
NOTE: To obtain the best overall focus quality, open the menu and focus on the text. This will ensure that the best overall image quality is achieved. focus ring IGURE Focus ring and zoom ring Downloaded From projector-manual.com Boxlight Manuals...
Page 28
(under finger) elevator foot IGURE Adjusting the height of the projector 3 If necessary, turn the leveling knob to adjust the angle of the projected image. IGURE Turning the leveling knob Downloaded From projector-manual.com Boxlight Manuals...
25 feet. For best results, point the remote directly at the projector. menu/ select power zoom + zoom - forward backward zoom mode data video keystone standby IGURE Remote control Downloaded From projector-manual.com Boxlight Manuals...
Data and Video (remote only) When you have more than one source (computer and video) con- nected to the projector, select between them by pressing the button on the keypad or the button on the source data video remote. Downloaded From projector-manual.com Boxlight Manuals...
Page 31
Use these buttons to navigate through and make adjustments to the on-screen menus. See “Using the On-Screen Menus” on page 25 for details. Power button This turns the lamp on and off. See page 14 for startup and shut- down details. Downloaded From projector-manual.com Boxlight Manuals...
Page 32
The LED blinks orange and the fans run while the projector cools down, then the projector shuts off and the LED lights solid green. Volume (keypad only) To increase the volume, press To decrease the vol- volume + ume, press volume - Downloaded From projector-manual.com Boxlight Manuals...
When you have completed your adjustments, navigate to Exit, then press . You are returned to the top of the menu/select Main menu. Press again to exit the Main menu, or menu/select navigate to another submenu. Downloaded From projector-manual.com Boxlight Manuals...
Adjusting the brightness changes the intensity of the image. 1 Use the up and down arrows to highlight Brightness, press , use the arrows to adjust the brightness, then menu/select press to accept your changes. menu/select Downloaded From projector-manual.com Boxlight Manuals...
Page 35
1 Use the up and down arrows to highlight Blank screen, press , use the arrows to cycle through the options blue, menu/select black, and white, then press to accept your selec- menu/select tion. Downloaded From projector-manual.com Boxlight Manuals...
1 Use the up and down arrows to highlight Mute, press , use the left or right arrow to turn mute on and off menu/select (a green dot indicates a feature is on), then press menu/select to accept your changes. Downloaded From projector-manual.com Boxlight Manuals...
Widescreen TVs. This option yields more detail than Widescreen Letterbox. displays the image with no resizing. Native Highlight , press , use the left or right arrow Resize menu/select buttons to cycle through the options, then press menu/select select. Downloaded From projector-manual.com Boxlight Manuals...
Page 38
If the image is still bad, try adjusting the tracking man- ually: 1 Turn Auto image off. 2 Highlight Manual tracking, press use the arrow menu/select, buttons to adjust Manual tracking until the fuzzy vertical bars are gone, then press menu/select Downloaded From projector-manual.com Boxlight Manuals...
Page 39
“torn.” If this happens, manually select a video standard. Highlight , press , use the left or right Video standard menu/select arrows to cycle through the options, then press menu/select select. Downloaded From projector-manual.com Boxlight Manuals...
To manually adjust the color gains: 1 Turn Auto Color Gain off. 2 Highlight Red, Green, or Blue, press use the menu/select, arrow buttons to adjust the gain, then press menu/select The settings are saved for each source. Downloaded From projector-manual.com Boxlight Manuals...
Select among 1, 5, 10, 15 and 30 minutes and 1 and 2 hours by clicking the left or right arrow buttons and cycling through the options. Downloaded From projector-manual.com Boxlight Manuals...
Display Messages This setting toggles between On and Off. When this feature is On, status messages such as “No signal detected” or “Standby Active” appear in the lower-right corner of the screen. Downloaded From projector-manual.com Boxlight Manuals...
Language, then press again to access the Language menu. menu/select 2 Press the arrow buttons to highlight the desired language, then press . Press to exit this menu and menu/select menu/select return to the Main menu. Downloaded From projector-manual.com Boxlight Manuals...
Indicates the active source, PC 1-Analog, PC 1-Digital, Video1 S- Video, and Video 2-Composite (also PC 2-VESA and Video 3- Component when using the optional connectivity module). Software Version Indicates the projector’s software version. This information is useful when contacting Technical Support. Downloaded From projector-manual.com Boxlight Manuals...
Page 45
You can order new lamp mod- allow the projector to cool for at ules from Boxlight. See “Accessories” on page 46 for information. least 30 minutes before you open Follow these steps to replace the projection lamp: the lamp module door.
Page 46
4 Loosen the two non-removable screws on the outside of the module (Figure 29). CAUTION: Never operate the projector with the lamp door open or removed. This disrupts the air flow and causes the projector to overheat. IGURE Loosening the screws on the lamp module Downloaded From projector-manual.com Boxlight Manuals...
Page 47
- source (while still holding down the button) for 5 seconds. volume - Verify that the counter was reset by viewing the counter in the Status window. Downloaded From projector-manual.com Boxlight Manuals...
Page 48
Cable Lock System (Figure 31). See “Optional Accessories” on page 46 for ordering information. Refer to the information that came with the lock for instructions on how to use it to secure the projector. IGURE Installing the security lock Downloaded From projector-manual.com Boxlight Manuals...
Page 49
Make sure your computer’s video board is installed and con- • figured correctly. Make sure your computer has a compatible video board. The • projector isn’t CGA or EGA compatible. Downloaded From projector-manual.com Boxlight Manuals...
Page 50
Problem: Image and menus are reversed left to right Rear projection mode is probably turned on. Turn Rear Projec- • tion off in the Controls menu. The image should immediately return to forward projection. See “Rear Project” on page 34. Downloaded From projector-manual.com Boxlight Manuals...
Page 51
Problem: Lamp shuts off A minor power surge may cause the lamp to shut off. Unplug • the projector, wait at least a minute, then plug it back in. Make sure the vents are not blocked. • Downloaded From projector-manual.com Boxlight Manuals...
Page 52
& Before calling B for assistance, please have the following OXLIGHT information available: the projector’s serial number (located on the bottom label) • the resolution of your computer. • Call Boxlight at 1-800-762-5757 360-779-7901 Downloaded From projector-manual.com Boxlight Manuals...
Page 53
10.25 x 3.34 x 12 inches (26 x 8.5 x 30.5 cm) Weight 5.7 lbs. (2.6 kg) unpacked with module 6.5 lbs. (2.9 kg) Optics Focus Range 5 - 16 feet (1.5-5 m) Lamp Type 270-watt SHP lamp Input Power Requirements 100-120VAC 5A;50/60Hz 200-240VAC 3A; 50Hz Downloaded From projector-manual.com Boxlight Manuals...
Page 54
UK Power Cord the projector. European Power Cord Danish Power Cord Swiss Power Cord Optional Accessories Enhanced Connectivity Module ATA Case Deluxe Carry Case Deluxe Travel Case Audio/Video Cable (30’;9m) Digital Computer Cable with USB Downloaded From projector-manual.com Boxlight Manuals...
Page 55
1-in-2-out VGA Distribution Amplifier Deluxe Wheeled Projector and Computer Cart Macintosh Adaptor 40” Portable Projection Screen 50” Portable Projection Screen 60” Deluxe Insta-Theatre Screen Portable Projector Stand eBeam (Web Enabled Electronic Meeting Assistant) Projection Lamp Module Downloaded From projector-manual.com Boxlight Manuals...
Page 56
Conf.Simulscan Ambra** FN-F12 FN-F12 FN-F5 FN-F5 F2/Choose Option/F5 F2/Choose Option/F5 Amrel* ** setup menu setup menu Shift-Ctrl-D Shift-Ctrl-D Apple see Mac Portable and Mac PowerBook Aspen automatic automatic Award FN-F6 FN-F6 BCC* automatic reboot computer Downloaded From projector-manual.com Boxlight Manuals...
Page 57
Digital* automatic reboot FN-F2 FN-F2 Dolch dip switch to CRT dip switch to LCD Epson dip switch to CRT dip switch to LCD Everex* setup screen option setup screen option For-A Ctrl-Alt-Shift-C Ctrl-Shift-Alt-L Fujitsu FN-F10 Downloaded From projector-manual.com Boxlight Manuals...
Page 58
160, 165, 180, Control Panel folder, Pow- warm reboot 520, 540, 5300 erBook Display folder; Activate Video Mirroring 210, 230, 250, requires Apple Docking Station or Mini Dock 270, 280, 2300 Magitronic FN-F4 FN-F4 Mastersport FN-F2 FN-F1 Downloaded From projector-manual.com Boxlight Manuals...
Page 60
* These manufacturers have models that automatically send video to the external CRT port when some type of display device is attached. ** These manufacturers offer more than one key command depend- ing on the computer model. Downloaded From projector-manual.com Boxlight Manuals...
Page 61
1 Open the Control Panel, then double-click Monitors and Sound. 2 In the Resolution list, choose the SimulScan mode, then click 3 If this changes your display settings, a dialog box appears. Click OK to confirm the change. Downloaded From projector-manual.com Boxlight Manuals...
Page 65
NTSC video 31 sharpness 27 SimulScan, using with PowerBooks 53 Source button 22 on-screen menus specifications 45 changing language of 35 standby 17, 24 displaying 25 standby time 33 overscan 31 Status menu 36 S-video, connecting 10 Downloaded From projector-manual.com Boxlight Manuals...
Page 66
30, 43 VESA connector 12 video mirroring on a PowerBook 53 video resize 31 video standards 31 Volume buttons 24 volume, adjusting 24 widescreen video 29 Zoom mode 24 zooming the image 19, 24, 30 Downloaded From projector-manual.com Boxlight Manuals...
Page 67
THAT EXTEND BEYOND THE FACE HEREOF AND THE FOREGOING WARRANTY SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN INSTRUMENT SIGNED BY BOXLIGHT. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU.
Page 68
FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOST PROFITS, LOST REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT IS A CONSIDERATION IN LIMITING BOXLIGHT’S LIABIL- ITY. NO ACTION, REGARDLESS OF FORM, ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT MAY BE BROUGHT BY PURCHASER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED.