Table of Contents
Advertisement
Auto Shutdown
Uses this function to automatically turn off the lamp if the
projector does not detect an input signal for specified
time period (30 minutes).
Select the desired setting with the
ON
OFF
OSD Timeout
Duration OSD (On-Screen Display) menu stays active (at
idle state by second).
Select the desired setting with the
Menu Position
Selects the position of the OSD (On-Screen Display) menu
on the screen.
Select the desired setting with the
Factory Reset
Resets the projector to its factory default settings.
Press the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control to enter its sub-menu, select
the desired setting with the
with the MENU\ENTER button on the Projector Control Panel or the
Enter button on the Remote Control again.
Audio
Option
Actions/Descriptions
Volume
Adjusts the volume.
Select the desired setting with the
Press the
Press the
Mute
Cuts off the sound temporarily.
Select the desired setting with the
ON
OFF
EN-32
/
buttons, and confirm the selection
button to decrease the volume.
button to increase the volume.
/
buttons:
/
buttons.
/
buttons.
/
buttons:
/
buttons:
Advertisement
Table of Contents
