Optimizing video images
After the video device is connected properly and the image is on the screen,
you can optimize the image using the onscreen menus. For general informa-
tion on using the menus, see page 27.
•
Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture
menu. See page 28.
•
Change the Aspect ratio. Aspect ratio is the ratio of the image width to
image height. TV screens are usually 1.33:1, also known as 4:3. HDTV
and most DVDs are 1.78:1, or 16:9. Choose the option that best fits your
input source. See page 28.
•
Select a Sharpness setting. See page 30.
•
Adjust the Color Temperature. Select a listed value, or select User and
individually adjust the intensity of the red, green, and blue color. See
page 30.
•
Select a different Video Standard. Auto tries to determine the standard
of the incoming video. Select a different standard if necessary. See
page 30.
•
Turn overscan on to remove noise around the video image. See page 30.
SALE on Projector Bulbs at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
Customizing the projector
You can customize the projector for your specific setup and needs. See
page 31 to page 34 for details on these features.
•
For rear projection, turn Rear mode on in the Settings>System menu.
•
For ceiling mounted projection, turn Ceiling mode on in the Set-
tings>System menu.
•
Specify which source the projector checks first for active video during
power-up.
•
Specify the function of the Effect Key on the remote.
•
Turn the projector's display messages on and off.
•
Turn on power saving features.
•
Specify blank screen colors and startup logos.
•
Specify the menu language.
26