Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Studio Technologies 5204
Summary of Contents for Studio Technologies 5204
-
Page 1: User Guide
Model 5204 Dual Line Input to Dante™ Interface User Guide Issue 1, August 2014 This User Guide is applicable for serial numbers M5204-00151 and later Copyright © 2014 by Studio Technologies, Inc., all rights reserved www.studio-tech.com 50278-0814, Issue 1... -
Page 2: Table Of Contents
Table of Contents Introduction..............3 Connections..............6 Dante Configuration............7 Operation..............7 Technical Notes ............10 Specifications ............... 11... -
Page 3: Introduction
B are summed to create output channel 1; channel 2 signals of line inputs A and B are summed to create output channel 2.) Figure 1. Model 5204 Dual Line Input to Dante Interface front and rear views Model 5204 User Guide Issue 1, August 2014 Studio Technologies, Inc. - Page 4 Applications standard 3-pin female XLR connectors. A single rotary level control allows the input The Model 5204 is perfect for use in conjunc- sensitivity of both channels to be adjusted. tion with a variety of fixed and portable audio Using the push-in/push-out knob it’s a equipment that offer analog output signals.
- Page 5 Ethernet Data and PoE and 1.2 V/1.2 V charging modes. Besides charging, the port can allow a connected The Model 5204 connects to a data net- device to continuously send audio to the work using a standard 100 Mb/s twisted- associated Dante network without requiring pair Ethernet interface.
-
Page 6: Connections
2-channel (stereo) unbalanced line- made using the connectors located on the level analog audio signal source. This will front and back panel of the Model 5204. An typically be associated with consumer and Ethernet data connection with Power-over-... -
Page 7: Dante Configuration
A USB type A receptacle is located on the back panel of the Model 5204. It allows The two transmitter channels associated connection to a wide variety of devices that with the Model 5204’s Dante interface... -
Page 8: Initial Operation
A interface and associated network. The and line input B should have been made SYS LED will light red upon Model 5204 as desired. A device may have been con- power up to indicate that the Dante inter- nected to the USB dedicated charging face is not ready. - Page 9 3.5 mm jack is associated It’s important to highlight that the Model with Dante transmitter channel 2. The push- 5204’s two 2-channel line inputs (A and B) in/push-out rotary control adjusts the input combine in the analog domain. In effect level of both channels of line input A.
-
Page 10: Technical Notes
Model indicated. The top row of seven LEDs will 5204’s Ethernet connection. As of the date display the major version number with a of writing this guide it’s not evident as to range of 1 to 7. -
Page 11: Specifications
5.1 inches deep (13.0 cm) –3 dBu @ 100% rotation Mounting Option: bracket kit Maximum Level: +10 dBu Weight: 0.8 pounds (0.35 kg) Specifications subject to change without notice. Model 5204 User Guide Issue 1, August 2014 Studio Technologies, Inc. Page 11...
Need help?
Do you have a question about the 5204 and is the answer not in the manual?
Questions and answers