Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Studio Technologies Manuals
  4. Recording Equipment
  5. 5365
  6. User manual

Studio Technologies 5365 User Manual

Headset interface
Hide thumbs

Advertisement

Quick Links

Download this manual
Model 5365
Headset Interface
User Guide
Issue Preliminary 1, January 2025
This User Guide is applicable for serial numbers
M5365-00151 and later with Application Firmware 1.11 and later
and STcontroller application for Windows
version 4.02.00 and later
®
Copyright © 2025 by Studio Technologies, Inc., all rights reserved
studio-tech.com
50788-0125, Issue Preliminary 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 5365 and is the answer not in the manual?

Questions and answers

Related Manuals for Studio Technologies 5365

Summary of Contents for Studio Technologies 5365

  • Page 1 This User Guide is applicable for serial numbers M5365-00151 and later with Application Firmware 1.11 and later and STcontroller application for Windows version 4.02.00 and later ® Copyright © 2025 by Studio Technologies, Inc., all rights reserved studio-tech.com 50788-0125, Issue Preliminary 1...
  • Page 2 This page intentionally left blank.

  • Page 3: Table Of Contents

    Table of Contents Revision History ..........................4 Introduction............................5 Getting Started ..........................5 Dante Configuration .......................... 9 Model 5365 Configuration ......................... 10 Operation............................15 Technical Notes ..........................15 Specifications ............................ 18 Appendix A–STcontroller Default Configuration Values ..............20 Appendix B– Graphical Description of the Installation Kit for Panel-Cutout or Surface-Mounting Use (Order Code RMBK-10) ......................

  • Page 4: Revision History

    Model 5365 HEADSET INTERFACE Revision History Issue Preliminary 1, January 2025: • Initial preliminary release. Issue Preliminary 1, January 2025 Model 5365 User Guide Page 4 Studio Technologies, Inc.

  • Page 5: Introduction

    Locating the Model 5365 5365 Headset Interface. If desired, an optional instal- lation kit will be used to mount a Model 5365 unit into The Model 5365’s location will depend on where the a panel cutout, wall surface, or equipment rack. Signal user or technical personnel needs access to it.
  • Page 6 Once the two standard-length brackets have been Panel Cutout or Surface Mounting installed the Model 5365 will be ready to be mounted onto a flat surface. Secure the unit to the surface using One Model 5365 Unit two mounting screws per side.
  • Page 7 Installation kit RMBK-12 is used to allow two Model ment rack is required. Secure the assembly into the 5365 units to be mounted in one space (1U) of a equipment rack using two mounting screws per side. standard 19-inch equipment rack. The kit can also be...

  • Page 8: Stereo Line Input

    A balanced dynamic micro- phone should, in most cases, also function correctly if the signal – (low) is connected to Model 5365’s mic in –/shield connection. No support is provided for microphones that require P12 or P48 phantom power.

  • Page 9: Audio Routing

    UltimoX2 integrated circuit. The two Dante transmitter (output) channels have default names of Ch1 and For audio to pass to and from the Model 5365 requires Ch2. The two Dante receiver (input) channels have that several Dante-related parameters be config- default names of Ch1 and Ch2.

  • Page 10: Model 5365 Configuration

    AES67 Configuration – AES67 on the same local area network (LAN) and subnet Mode as the Model 5365 units that are to be configured. Immediately after starting STcontroller the application The Model 5365 can be configured for AES67 op- will locate all the Studio Technologies’ devices that eration.
  • Page 11 LED, labeled power, that is located on the will probably be appropriate for them. Electret micro- left side of the Model 5365’s front panel. phones often have internal circuitry which provides a relatively high output level. The 18 dB and 24 dB gain...
  • Page 12 The output of the Model 5365’s microphone pream- Dante input 1 to only the right headphone output chan- plifier can exit the Model 5365 by way of two Dante nel. Selecting Left and Right will send Dante input 1 transmitter (output) channels. Each channel can be to both the left and right headphone output channels.
  • Page 13 Choices are Left, Right, and Left and Right. inputs will not impact the sidetone level as it is sent The Model 5365 has two analog line input channels to the headphone output channels. The overall level that are physically connected using one 3.5 mm TRS configuration setting will impact the sidetone level.
  • Page 14 Selecting a value of 2 would make the input circuitry and 2. the least sensitive. Selecting a value of 31 would make The Model 5365 includes a 2-channel analog line the input circuitry the most sensitive, in effect having output that is interfaced using a 3.5 mm TRS jack.

  • Page 15: Operation

    “console tape,” with its specific channels for a total interval of six seconds. The tone static IP address. If knowledge of a Model 5365’s IP will be added (summed) with the usual headphone address has been misplaced there is no reset button audio signal.
  • Page 16 STcontroller. Upon power up, Model 5365, the name of the zip file itself will include LEDs on the Model 5365’s front panel will light in the file’s version number. For example, a file named a unique “bit map”...

  • Page 17: Restoring Factory Defaults

    5365’s Dante interface. (PoE) present to the RJ45 jack. Restoring Factory Defaults 4. After a few seconds the Model 5365 will run a “boot loader” program that will automatically load the A command in the STcontroller software application new application firmware file (M5365vXrXX.stm).

  • Page 18: Specifications

    Configuration: requires Studio Technologies’ Compatibility: intended for connection to stereo STcontroller for Windows software application (dual-channel) or monaural (single-channel) head- sets with nominal impedance of 50 ohms or greater Issue Preliminary 1, January 2025 Model 5365 User Guide Page 18 Studio Technologies, Inc.
  • Page 19 RMBK-13 allows one unit to be mounted in the center of one space (1U) of a standard 19-inch rack Specifications and information contained in this User Guide subject to change without notice. Model 5365 User Guide Issue Preliminary 1, January 2025 Studio Technologies, Inc. Page 19...

  • Page 20: Appendix A-Stcontroller Default Configuration Values

    Analog Line Outputs – Dante Input 1 Level: 23 Analog Line Outputs – Dante Input 2 Level: 23 Analog Line Outputs – Microphone Input Level: 23 Analog Line Outputs – Overall Level: 23 Issue Preliminary 1, January 2025 Model 5365 User Guide Page 20 Studio Technologies, Inc.

  • Page 21: Appendix B- Graphical Description Of The Installation Kit For Panel-Cutout Or Surface-Mounting Use (Order Code Rmbk-10)

    Appendix B–Graphical Description of the Installation Kit for Panel Cutout or Surface-Mounting Use (Order Code: RMBK-10) This installation kit is used for mounting one Model 5365 unit into a panel cutout or flat surface. Model 5365 User Guide Issue Preliminary 1, January 2025 Studio Technologies, Inc.

  • Page 22: Appendix C-Graphical Description Of Left- Or Right-Side Rack-Mount Installation Kit For One "1/2- Rack" Unit (Order Code Rmbk-11)

    Installation Kit for One “1/2-Rack” Unit (Order Code: RMBK-11) This installation kit is used for mounting one Model 5365 unit into one space (1U) of a 19-inch equipment rack. Unit will be located on the left- or right-side of the 1U opening.

  • Page 23: Appendix D-Graphical Description Of Rack-Mount Installation Kit For Two "1/2- Rack" Units (Order Code Rmbk-12)

    Two “1/2-Rack” Units (Order Code: RMBK-12) This installation kit can be used to mount two Model 5365 units or one Model 5365 unit and another product that is compatible with the RMBK-12 (such as the Studio Technologies’ Model 5421 Dante Intercom Audio Engine) into one space (1U) of a 19-inch equipment rack.

  • Page 24: Appendix E-Graphical Description Of Center Rack-Mount Installation Kit For One "1/2- Rack" Unit (Order Code Rmbk-13)

    One “1/2-Rack” Unit (Order Code: RMBK-13) This installation kit is used for mounting one Model 5365 unit into one space (1U) of a 19-inch equipment rack. Unit will be located in the center of the 1U opening. Issue Preliminary 1, January 2025...