Advertisement
Quick Links
Model 5202
Dante to Phones and Line Output Interface
User Guide
Issue 2, August 2015
This User Guide is applicable for serial numbers
M5202-00151 and later with application firmware 1.3 and later
and Dante firmware 1.3 (Ultimo 2.2.2.5) and later
Copyright © 2015 by Studio Technologies, Inc., all rights reserved
studio-tech.com
50276-0815, Issue 2
Advertisement
Related Manuals for Studio Technologies 5202
Summary of Contents for Studio Technologies 5202
- Page 1 Issue 2, August 2015 This User Guide is applicable for serial numbers M5202-00151 and later with application firmware 1.3 and later and Dante firmware 1.3 (Ultimo 2.2.2.5) and later Copyright © 2015 by Studio Technologies, Inc., all rights reserved studio-tech.com 50276-0815, Issue 2...
- Page 2 This page intentionally left blank.
-
Page 3: Table Of Contents
Table of Contents Revision History............4 Introduction ..............5 Getting Started ............. 7 Connections..............7 Dante Configuration............8 Operation ..............9 Technical Notes ............10 Specifications ............... 13 Model 5202 User Guide Issue 2, August 2015 Studio Technologies, Inc. Page 3... -
Page 4: Revision History
Revision History Issue 2, August 2015: 1. Documents enhanced unit identification feature. 2. Adds improvements to IP address configuration assignment explanation. Issue 1, August 2014: 1. Initial release. Issue 2, August 2015 Model 5202 User Guide Page 4 Studio Technologies, Inc. -
Page 5: Introduction
“semi-pro” equipment. Figure 1. Model 5202 Dante to Phones and Line Output Interface front and rear views Model 5202 User Guide Issue 2, August 2015 Studio Technologies, Inc. - Page 6 Dante to Phones and Line Output Interface Line Outputs Ethernet Data and PoE The Model 5202 provides a 2-channel The Model 5202 connects to a data network line-level, electronically-balanced analog using a standard 100 Mb/s twisted-pair audio output by way of standard 3-pin male Ethernet interface.
-
Page 7: Getting Started
A set of mounting brack- Headphone Output ets is available to allow a Model 5202 to be attached to the underside of a desk, table, The Model 5202’s headphone output is broadcast set, or other flat surface. Contact compatible with standard stereo head- Studio Technologies for details. -
Page 8: Dante Configuration
–20 dBFS, when it’s 5202 will support audio sample rates of routed to a Model 5202 the associated line 44.1, 48, 88.2, and 96 kHz with a limited output will have a nominal level of +4 dBu. -
Page 9: Operation
Dante device. The SYNC LED will light red when the Model 5202 is Initial Operation not synchronized with a Dante network. It will light solid green when the Model 5202... -
Page 10: Technical Notes
Model 5202 Dante to Phones and Line Output Interface Model 5202 level meter and Dante status headsets, or earbuds to damaging levels. LED operation will again take place. Hearing damage is a real possibility and caution must be exercised. Level Meters... - Page 11 “probe” devices on a network for Technologies’ Dante-enabled products, the this information. For example, in Windows Model 5202 does not have a USB inter- OS the arp –a command can be used to face for firmware updating. This is because display a list of LAN information that in- of the Model 5202’s simple, well-defined...
- Page 12 “chip.” This firmware can be updated by tory on support issues. The meter LEDs way of the Model 5202’s Ethernet connec- will first go through a display sequence tion. The latest Dante firmware file is avail- followed by an approximately 1-second able on the Studio Technologies website.
-
Page 13: Specifications
1.7 inches high (4.3 cm) 5.1 inches deep (13.0 cm) Mounting Option: MBK-02 Mounting Bracket Kit Weight: 0.8 pounds (0.35 kg) Specifications subject to change without notice. Model 5202 User Guide Issue 2, August 2015 Studio Technologies, Inc. Page 13...
Need help?
Do you have a question about the 5202 and is the answer not in the manual?
Questions and answers