General Information; Description - Hilti PR 2-HS Operating Instructions Manual

1 General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
en
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Symbols
Read the General
operating warning
instructions
before use.
For indoor Warning:
use only caustic
substances
KCC‑REM-
HLT‑PR2HS

2 Description

2.1 Use of the product as directed
The PR 2-HS is a rotating laser that projects a rotating, visible laser beam. The rotating laser can be used horizontally
and for inclined planes.
The tool is designed to be used for determining, transferring and checking references in the horizontal and inclined
planes. Examples of uses are the transferring of datum lines and heights. The tool is designed for professional use and
may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of
any special hazards that may be encountered.
The tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used
not as directed.
Hilti supplies various accessories which allow the tool to be used with maximum efficiency.
16
Return waste Do not look
material for into the
recycling. beam.
Warning: Warning:
electricity explosive
substances
On the tool
Laser Class 2 in accordance with IEC/EN 60825‑1:2007
On the tool
Laser Class II according to CFR 21, § 1040 (FDA)
Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Generation: 01
Serial no.: