Advanced Functions; Programming Modes - Thrustmaster Ferrari User Manual

ADVANCED FUNCTIONS

ADJUSTING THE OPTICAL WHEEL'S SENSITIVITY
The optical wheel (4) has 2 sensitivity modes:
- Normal sensitivity (the default mode)
- High sensitivity (must be set)
Setting "High Sensitivity" mode:
•
Steps
1
Raise and hold the "UP" direction on the optical wheel
2 Press and release the MAPPING button (7)
(Procedure must be carried out each time the gamepad restarts or is disconnected)
Returning to "Normal Sensitivity" mode:
•
Steps
1 Lower and hold the "DOWN" direction on the optical wheel
2 Press and release the MAPPING button (7)
Your optical wheel has now returned to Normal Sensitivity (the default mode)

2 PROGRAMMING MODES

The PRESET button and LED (8) allows you to view the type of programming selected:
AUTOMATIC (preprogrammed) or MANUAL (programmed by yourself). A single press of this button
allows you (even during the course of a game) to switch from one programming mode to the other.
"AUTOMATIC PRESET" (PRESET button OFF)
•
This represents the default programming: the functions of the optical wheel and the triggers are
preprogrammed, as are the positions of the buttons and the directions of the mini-sticks and of the D-Pad.
PLEASE REFER TO THE "AUTOMATIC PRESET" CONFIGURATION DIAGRAMS
"MANUAL PRESET" (PRESET button GREEN)
•
This represents your own personal programming:
- The buttons, directions of the mini-sticks and of the D-Pad can either be
* programmed on the optical wheel and on the triggers,
* or switched between themselves.
- You can modify the programming to your liking and whenever you wish.
- The programming is automatically saved inside your gamepad (even when disconnected).
- When your "MANUAL PRESET" is clear, it is identical to the "AUTOMATIC PRESET".
Action
Your optical wheel is now more sensitive
Action
6/12
HOME button
Flashes continuously
HOME button
Does not flash