Advertisement
ADVANCED FUNCTIONS
PROGRAMMING BUTTONS / MINI-STICKS / D-PAD
All progressive buttons (on PS2 and PS3) or digital buttons (on PC), directions of the mini-sticks and of
the D-Pad can be switched using the MAPPING button (6).
• Examples of possible applications:
- Switching the functions of buttons
- Switching the 2 mini-sticks
(in this case, you must map the 4 directions of the first mini-stick to the 4 directions of the second)
- Switching the D-Pad with a mini-stick
(in this case, you must map the 4 directions of the D-Pad to the 4 directions of the mini-stick in
question).
• Programming/switching procedure:
Steps
1
Press and release the MAPPING button (6)
2
Press and release the button or direction to switch
Press and release the button or direction where you wish to
3
The two functions are now switched.
• To return to "default" programming (to erase all of your programming):
Steps
1
Press and hold the MAPPING button (6) for 2 seconds
2
Release the MAPPING button (6)
Your programming is now erased.
Please note that your programming also disappears each time the gamepad is disconnected,
or when the gamepad or console restarts.
USING MORE THAN ONE T-WIRELESS GAME PAD AT THE SAME TIME
(In multiplayer mode)
You can use up to 4 T-Wireless game pads at the same time (in multiplayer mode).
To do so, channel detection must absolutely be carried out manually, as described below.
• Procedure:
- For 2 seconds, simultaneously press and hold the 2 CONNECT buttons on the gamepad and the
receiver you wish to use (8 and 12).
- Repeat this procedure for other players.
Once a connection has been established, the LEDs stop flashing and stay lit.
Action
place the function
Action
4/6
LED (11)
(on gamepad)
FLASHES SLOWLY
FLASHES QUICKLY
ON
LED (11)
(on gamepad)
FLASHES SLOWLY
ON
Advertisement
