Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Thrustmaster Red Legend Edition Ferrari Racing Wheel
Summary of Contents for Thrustmaster Red Legend Edition Ferrari Racing Wheel
-
Page 2: Technical Features
Compatible: PlayStation®3 / PC User Manual TECHNICAL FEATURES 1 2 digital gearshift levers (UP and DOWN) 5 “SE” and “ST” buttons: 2 LED - for Select and Start 3 Action buttons - for programming 4 D-Pad 6 “Home” button for PlayStation®3 7 USB selector (“PC”... -
Page 3: Installing The Wheel
1. Connect the pedal cable (8) to the wheel’s RJ45 connector (9). For safety reasons, never use the pedal set with bare feet or while wearing only socks on your feet. THRUSTMASTER DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF INJURY RESULTING ®... - Page 4 PLAYSTATION®3 INSTALLATION ON PLAYSTATION®3 1. Set the wheel’s USB selector (7) to the “PS3” position. 2. Connect the USB connector (13) to a USB port on your console. 3. Turn on your console. 4. Launch the game. You are now ready to play! USING THE “HOME”...
- Page 5 Installation on PC 1. Set the wheel’s USB selector (7) to the “PC” position. 2. Go to http://support.thrustmaster.com to download the drivers and the force feedback software for PC. Click Racing Wheels / Ferrari Racing Wheel Red Legend Edition, then select Drivers.
-
Page 6: Advanced Functions
ADVANCED FUNCTIONS ADJUSTING THE WHEEL’S SENSITIVITY Your wheel’s steering has 2 sensitivity modes: - Normal sensitivity (the default mode) - High sensitivity (must be set) Setting “High Sensitivity” mode: Action LED color Simultaneously press and release: FLASHES the D-Pad (4) + the 2 UP and DOWN levers (1) SLOWLY Your wheel’s steering is now more sensitive. - Page 7 Erasing your programming Steps Action LED color Press and hold for 2 seconds: TURNS OFF SE + ST (5) THEN ON AGAIN Your programming has now been erased. CONFIGURING THE PEDALS ON PLAYSTATION®3 On PlayStation®3, your wheel’s accelerator and brake controls are in “separate” mode by default, meaning that the pedals function on independent axes: “Accelerator”...
-
Page 8: Configuring The Pedals On Pc
To return to “Separate Pedals” mode (the default mode) Action LED color Simultaneously press and release: the 2 pedals (14) + the “Home” button (6) On PlayStation®3 Your pedals have now returned to the default mode: “Separate” CONFIGURING THE PEDALS ON PC Your wheel’s accelerator and brake controls are in “separate”... -
Page 9: Troubleshooting And Warnings
- Switch off your computer or your console, completely disconnect your wheel including all cables, then reconnect the wheel and restart your game. - If the problem persists on PC, download the “Thrustmaster Calibration Tool” manual calibration software available at the following address: http://support.thrustmaster.com - Never move the wheel or pedals when connecting your wheel in order to avoid any calibration problems. -
Page 10: Consumer Warranty Information
Thrustmaster product according to applicable laws of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty period shall be one (1) year from the original date of purchase of the Thrustmaster product). -
Page 11: Technical Support
During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of any reconditioning procedures which Technical Support may request that the consumer carry out, by way of written instructions –... -
Page 12: Environmental Protection Recommendation
COPYRIGHT © 2017 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. All other trademarks are the property of their respective owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another.