Thrustmaster Ferrari User Manual page 8

PROGRAMMING THE OPTICAL WHEEL AND TRIGGERS
The 2 directions of the optical wheel and the 2 progressive triggers can be programmed using the
MAPPING button (7).
Examples of possible applications:
•
Programming a button, direction of a mini-stick or of the D-Pad:
- onto the "up" or "down" direction of the optical wheel
- onto the "right trigger" or "left trigger"
Programming procedure on optical wheel and triggers:
•
Steps
1 Enable "MANUAL PRESET" (8) by pressing the button.
2 Press and release the MAPPING button (7).
3 Press and release the button or direction to program.
Raise or lower the direction on the optical wheel
4
or press the trigger onto which you wish to place your function.
Your "MANUAL PRESET" is now enabled and up to date
(with your programming applied to the optical wheel or triggers)
SWITCHING BUTTONS/MINI-STICKS/D-PAD
All buttons, as well as directions of the mini-sticks and of the D-Pad can be switched using the MAPPING
button (7).
Examples of possible applications:
•
- Switch buttons between themselves
- Switch the 2 mini-sticks
(in this case, you will to have to map the 4 directions of the first mini-stick to the 4 directions of the
second mini-stick)
- Switch the D-Pad with a mini-stick
(in this case, you will have to map the 4 D-Pad directions to the 4 directions of the mini-stick in
question).
Procedure for switching buttons, mini-sticks and D-Pad
•
- Does not work for the triggers.
- Works for the optical wheel but only on PC and in "7 axes" mode.
Steps
1 Enable "MANUAL PRESET" (8) by pressing the button.
2 Press and release the MAPPING button (7).
3
Press and release the button or direction to switch.
Press and release the button or direction onto which you wish to
4
Your "MANUAL PRESET" is now enabled and up to date (with the 2 functions switched).
Action
Action
place your function.
7/12
PRESET button
color
Lit up green
Lit up red
Flashes red
Lit up green
PRESET button
color
Lit up green
Lit up red
Flashes red
Lit up green