Safety Instructions - Hilti TE 700-AVR Operating Instructions Manual

Power tool
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Single impact energy in accordance with EPTA proced-
ure 05/2009
Chuck
en
Hammering frequency under load
Information about the power tool and its applications
Protection class
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardized test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories, or is poorly maintained, the vibration emission may differ.
This may significantly increase the exposure level over the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintaining the tool and the accessories,
keeping hands warm, organization of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑1):
Typical A-weighted sound power level, TE 700-AVR
Typical A-weighted emission sound pressure level, TE
700-AVR
Uncertainty for the given sound level for the
TE 700‑AVR
Triaxial vibration values for the TE 700‑AVR (vibration
vector sum)
Chiseling, a
h, Cheq
Uncertainty (K)

5 Safety instructions

5.1 General Power Tool Safety Warnings
a)
WARNING
Read all safety warnings and all instructions. Fail-
ure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
5.1.1 Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
20
TE 700‑AVR
7.9 kg
564 mm x 125 mm x 248 mm
11.5 J
TE‑Y
46 Hz
Protection class II (double insulated)
97 dB (A)
86 dB (A)
3 dB (A)
measured in accordance with EN 60745‑2‑6
6.5 m/s²
1.5 m/s²
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
5.1.2 Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any ad-
apter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.