Bartscher Coffeeline 90.160 Instruction Manual page 42

Self-cleaning brewing assembly /initial rinsing
1. The device must be in the „ON" mode.
2. Turn off the device using the main on/off switch (see (8) fig. 1).
3. Press and hold the button "2 x espresso" and turn the device on simultaneously via
the main on/off switch (see (8) fig. 1).
Time settings
Hold the „continuous function button" on the left service panel for more than 8 seconds.
The programme's current setting is displayed on the LED display for a given brewing
assembly (except for the „continuous function button"– which flashes). The display shows
the following information:
Press the „continuous function button" on the left service panel until the display shows the
following information:
Press the "2 x espresso" button.
Changing day and time (fig. 7)
•
To set the hour, when the hour setting is flashing press the "1 x espresso" button to
advance and "1 x coffee" to go backwards.
•
To set the minute, hold the „2 x espresso" button until the minute setting begins to
flash. Now press the „1x espresso" button to advance or „1 x coffee" to go
backwards.
•
To change the day, hold the "2 x espresso" until the day display flashes. Now press
the „1x espresso" button to advance or the „1 x coffee" to go backwards.
Time setting
hh:mm
•
After changing the date, press „2 x espresso", to return to the main menu.
- 38 -
Doses programming
select 30s
Time setting
fig. 7
Day