Power-On Check - HP MSR93X Installation Manual

The Extend BootWare is self-decompressing........................Done!
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P.
Compiled Date
CPU Type
CPU L1 Cache
CPU L2 Cache
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
CPLD Version
PCB Version
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--flash:/mainmsr93x.bin!...........
............................................................................
The main application file is self-decompressing.............................
............................................................................
........................Done!
System application is starting..................................................
User interface aux0 is available.
Press ENTER to get started.
Press Enter and the system displays the following prompt:
<HP>
This prompt indicates that the router has entered user view and is ready to configure.

Power-on check

After powering on the router, check the following items:
The LEDs on the front panel are normal, as described in
•
• The console terminal displays information correctly. You can see the startup window on the local
console terminal. For more information, see
After completing the POST, the system prompts you to press Enter. When the command line
•
prompt appears, the router is ready to configure.
HP MSR931 BootWare, Version 1.01
: Sep 3 2012
: P1016
: 32KB
: 256KB
: 533MHz
: DDR3 SDRAM
: 256MB
: 667MHz
: 1024KB
: 128MB
: 131.0
: 3.0
25
"LED description."
"Startup process."
*
*
*