IDEAL 4810-95 Operating Instructions Manual page 46

http://www.monomachines.com
IDEAL 4810-95 • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP
http://www.monomachines.com
IDEAL 4850-95EP, IDEAL 5221-95EP,
IDEAL 6550-95EP
Cut cannot be made.
•
Measurement has not been reached
correctly.
•
LED "S" does not turn off.
X
Push the
S S S S S
Check the security cover (see page 42).
•
Measurement below 9 cm/3,54 inch
Hold the
S S S S S
measurement is achieved.
For More Info
Click Here --->
•
Backgauge
is shown on the display.
Open the clamp
Turn the hand wheel to the left as far as
possible.
•
Backgauge
(Hand-wheel has been turned to the left).
AB
" " is shown on the display.
­ inform service people.
None of the above mentioned methods
helped to solve the problem:
Contact Service Team under
•
www.ideal.de ­ "Service"
service@krug-priester.com
- 46 ­
Possible malfuntions
•
button again.
button until the
O
does not move and "
I
. . . . .
E
does not advance to position
I
•
AB
"