IDEAL 4810-95 Operating Instructions Manual page 24

http://www.monomachines.com
IDEAL 4810-95 • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP
http://www.monomachines.com
For More Info
Click Here --->
IDEAL 4850-95EP,
IDEAL 5221-95EP, IDEAL 6550-95EP
Start machine
•
Main switch
H
Open the front safety guard
•
Press
to the rear and searches for the reference
position, wait until a measurement
is shown in the display
IDEAL 4850-95/EP = 45 cm, 17,72 inches
IDEAL 5221-95EP = 52 cm, 20,47 inches
IDEAL 6550-95/EP = 61 cm, 24,02 inches
Before storing or cutting a measurement
please check if the correct measurement
scale (cm or inch) see above is stored.
For information on how to store see picture
below left.
Cutting to specified dimensions
•
Enter dimension on the numerical key pad
­ LED "S"
(If a wrong dimension is entered this can be
corrected by pressing the
•
Press
approached, ­ LED "S" disappears.
Dimensions below 9 cm ­ 3,5 cm (IDEAL
6550-95EP 2,5 cm) can only be approached
with the
the
I
measurement 9 cm blinks, keep
the
to e.g. 7 cm.
•
Insert paper and move by means of the
stacking angle to the backgauge
lay on the left
•
Close the front safety guard
•
Release the cut.
Cut according to markings
•
Adjust the backgauge with the hand-wheel
to the back.
•
Insert paper and move by means of the
stacking angle to the backgauge
lay on the left
•
Turn the hand-wheel
marking on the paper to be cut is below the
cutting line indicator.
Only EP machines.
•
The further the hand-wheel
backgauge moves. If the hand-wheel is
turned to the left the backgauge will return
quicker.
- 24 ­
to position "I", insert the key
F
for the control panel and turn it to the right.
button ­ backgauge
S O
Warning!
X appears.
button ­ dimension is
S
button pressed and held. (When
S
button is released, the backgauge
O
S
moves to a measurement of 9 cm ­
button pressed, backgauge
S
.
J
J.
is turned to the right, the quicker the
Operation
•
A
moves
I
D.
button).
s
I moves
and side
I
A.
and side
I
to the right until the
G
G
•
Q
G