IDEAL 4810-95 Operating Instructions Manual page 32

http://www.monomachines.com
IDEAL 4810-95 • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP
OK
Clamping
Blade
OK
http://www.monomachines.com
C
A
B
For More Info
Click Here --->
- 32 ­
Blade and cutting stick replacement
•
The 3 eccentrics are now exposed and should
be turned counter clockwise to position "0"
with the special wrench and attachable
extension pipe (A) (in the tool set). The slot
must correspond to position "0" (B).
Only IDEAL 4810-95, 4850-95/EP
Unscrew the blade screws (C) on the right
hand side.
•