Table of Contents
Advertisement
K-M
E
IX
DITOR
5.2.2.3 – R
EVERB
This section of the Reverb tab is home to all of the settable options for the reverb effect itself.
P
D
RE
ELAY
Adjusts the amount of time between the dry audio and the initial reverb reflections.
• Lower values result in more instantaneous reflections.
• Higher values result in an audible delay before the reverb begins.
• Range: 0.5ms – 250ms
D
T
ECAY
IME
Adjusts the length of the reverb tail.
• Lower values create a short reverb decay.
• Higher values create a longer reverb decay.
• Range: 50ms – 2000ms
D
AMPING
Adjusts how quickly the reverb rolls off the high-frequency content.
• Less damping results in the high frequencies fading at the same rate as the low frequencies.
• High damping results in the high frequencies quickly dropping off while the low frequencies
continue to sound.
• Range: 1% – 100%
D
IFFUSION
Simulates adjusting the complexity of the reverb's reflections.
• Less diffusion is like being in a room with flat walls; the reflections will be rather uniform and
spaced evenly.
• High diffusion is like being in a room with a very complex wall surface; the reflections will be
less uniform and spaced unevenly.
• Range: 1% – 100%
P
ARAMETERS
1 1 1
Advertisement
Table of Contents
