Keith McMillen Instruments K-MIX User Manual page 109

K-M E
IX DITOR
I T
NPUT RIM
The input trim knob controls the input trim level of the currently selected
channel.
• Turn clockwise to increase the value; turn counterclockwise to
decrease the value.
• A specific value may be entered into the accompanying number
box as an alternative way of setting the trim level.
Channels 1–2 have a different range than channels 3–8:
• Range (Channels 1–2): 0dB – +60dB
• Range (Channels 3–8): -20dB – +40dB
R F
UMBLE ILTER
K-Mix's rumble filter is an adjustable high-pass filter intended for filtering
out low frequency rumbles and handling noise that may occur when
using microphones as input.
B B
YPASS UTTON
Toggles the input rumble filter for the currently selected channel on
or off.
• The button will light up white when enabled (rumble filter on).
• The button will go dark when disabled (rumble filter off).
• By default, the rumble filter will be off.
This is an editor-only parameter. It may not be adjusted from the mixer.
R F F
UMBLE ILTER REQUENCY
Controls the center frequency of the input rumble filter.
• Turn clockwise to increase the frequency; turn counterclockwise to decrease the frequency.
• A specific value may be entered into the accompanying number box as an alternative way
of setting the frequency.
• Range: 40Hz – 400Hz
This is an editor-only parameter. It may not be adjusted from the mixer.
Input Trim
1.50 dB
Rumble Filter
224 Hz
98