Keith McMillen Instruments K-MIX User Manual page 114

K-M E
IX DITOR
G S
ATE ECTION
The Gate section of the channel strip is home to the noise gate parameters.
Each of the 8 input channels (and the main output bus) have their own
noise gate available for shaping your sounds.
B B
YPASS UTTON
The bypass button enables or disables the gate.
• Clicking the button will toggle the state of the bypass.
• The button will light up
• The button will go dark when disabled (gate bypassed).
T K
HRESHOLD NOB
The threshold knob controls the volume level at which the gate will
engage.
• Turn clockwise to increase (higher threshold); turn
counterclockwise to decrease (lower threshold).
• A specific value may be entered into the accompanying number box as an alternative way
of setting the threshold.
• Range: -70dB – +10dB
• When the effect is enabled, any audio below the threshold will cause the gate to engage.
G R
AIN EDUCTION
The gain reduction knob controls how much the gate will reduce the audio when the effect is
engaged.
• Turn clockwise to increase (more gain reduction); turn counterclockwise to decrease (less
gain reduction).
• A specific value may be entered into the accompanying number box as an alternative way
of setting the threshold.
• Range: -70dB – 0dB
orange when enabled (gate on).
& N B
UMBER OX
K & N B
NOB UMBER OX
GATE
Thresh Gain Reduc.
-70.00 dB -24.00 dB
Attack Release
10 ms 50 ms
103