Keith McMillen Instruments K-MIX User Manual page 101

K-M E
IX DITOR
• You must enter a name for the preset before the save happens.
• Once saved, the new preset is added to the Preset Library and the corresponding Setlist slot
is switched over to the new preset.
C I S
OPY NTO LOT
The "Copy Into Slot [A–L]" option is more like a normal "Save" behavior.
• When this is selected, the preset settings from the mixer will be loaded into whatever preset
is currently in the corresponding setlist slot (in the editor). You can then choose to Save,
Save As, or Revert these settings in the editor.
R D
EMEMBER ECISION
When receiving a preset, there is an option to "Remember Decision".
• Checking this option will always perform the same receiving behavior every time without
the need to go through the pop-up dialog.
• This decision can be reset in the Preferences window using the "Reset Receive Preset
Behavior" button.
If a slot is set to [DEFAULT], the editor will always receive the preset as a new preset
("Receive As").
E U
XAMPLE SE
S I N
AVE NTO EW
1. Click the RECEIVE button on slot C.
2. A pop-up dialog appears asking if you want to "Save Into New Preset" or "Copy Into Slot
[A–L]".
3. Check the "Save Into New Preset" option.
4. Enter a preset name in the provided text box.
5. Click the RECEIVE button to initiate the preset receiving process.
6. The new preset (with all the settings from the mixer's slot C preset) is added to the
bottom of the Preset Library and becomes the currently active/selected preset.
7. Setlist slot C's drop-down menu now switches over to the newly saved/received preset.
C I S
OPY NTO LOT
1. Click the RECEIVE button on slot D.
2. A pop-up dialog appears, asking if you want to "Save Into New Preset" or "Copy Into Slot
[A–L]"
3. Check the "Copy Into Slot [A–L]" option.
[A–L]
P
RESET
[A–L]
90