Keith McMillen Instruments K-MIX User Manual page 100

K-M E
IX DITOR
• Setting a slot to [OFF] will not delete any preset that may have already been present in the
selected slot on the K-Mix hardware. It will remain there unaltered; it is solely the sending/
receiving/syncing that will have been disabled.
[DEFAULT]
[DEFAULT is the second of two special options available in the setlist drop-down menus.
• Selecting [DEFAULT] sets that preset slot to K-Mix's default preset (a blank or "normalled"
preset). When sending a [DEFAULT] preset, the editor will send down a blank, default preset
to that slot. When receiving/syncing, it will always use the "Save Into New Preset" behavior.
S B
END UTTON
Each slot in the Setlist has its own SEND button. The SEND buttons are for
sending just a single preset down to the connected K-Mix, one at a time.
• Whatever preset is selected in the Setlist slot's drop-down menu will be
sent down to the mixer, overwriting whatever preset was in that slot on the
K-Mix hardware.
• To use, just click the SEND button and the selected slot's preset will be sent to the board.
A Setlist slot's SEND button is only available if a preset is selected for that slot. If a
slot is set to [OFF], its SEND button will be greyed out and inaccessible.
E U
XAMPLE SE
1. Click the SEND button on slot B.
2. Whatever preset is currently in slot B's drop-down menu will be sent down to the mixer,
overwriting whatever was in the mixer's B preset slot.
R B
ECEIVE UTTON
In addition to the SEND button, each slot in the Setlist has its own RECEIVE
button. The RECEIVE buttons perform the reverse behavior of the SEND
buttons — they read a preset from the mixer and place it in the editor.
When a RECEIVE button is clicked, the editor presents you with a choice
between saving to a new preset, or copying into the corresponding Setlist preset.
A Setlist slot's RECEIVE button is only available if a preset is selected for that slot. If a
slot is set to [OFF], its RECEIVE button will be greyed out an inaccessible.
S I N
AVE NTO EW
The "Save Into New Preset" option does just that — saves the mixer preset as a new preset in the
Preset Library. It is very similar to "Save As" behavior.
P
RESET
89