Canon imageprograf ipf780 User Manual page 454

Configuring the IP Address Using imagePROGRAF Device Setup Utility
When specifying an IPv4 IP address
1
Start imagePROGRAF Device Setup Utility from
the start menu.
2
In the Device Name list displayed, select the printer to configure.
3
Choose Protocol Settings from the Printer menu.
4
Select the IPv4 tab.
5
In the Setting IP Address list, choose Manual.
6
Enter the IP address assigned to the printer and click the Set button.
7
Click OK after the Confirmation message is displayed.
8
Exit imagePROGRAF Device Setup Utility.
• To configure the IP address automatically, choose Auto in the Setting IP Address list and select DHCP, BOOTP,
or RARP.
Note
You can also specify the subnet mask and default gateway.
•
454
iPF780
User's Guide