Adjusting The Feed Amount; Selecting A Feed Amount Adjustment Method - Canon imageprograf ipf780 User Manual

iPF780

Adjusting the feed amount

Adjusting the feed amount
Adjusting the Feed Amount ........................................................................................................................................ 483

Selecting a Feed Amount Adjustment Method ............................................................................................ 483

Automatic Banding Adjustment .......................................................................................................................... 484
Manual Banding Adjustment ................................................................................................................................ 485
Fine-Tuning the Paper Feed Amount ................................................................................................................. 487
Adjusting Line Length .............................................................................................................................................. 487
Adjusting the Vacuum Strength ................................................................................................................................ 489
Adjusting the Feed Amount
Adjusting the Feed Amount
If printed documents are affected by the following problems, try adjusting the feed amount.
Banding in different colors
•
Line length is not accurate in the direction paper is fed
•
To adjust the feed amount, do the following, in this order.
1
Depending on the issue, adjust Adj. Priority to suit the particular type of paper.
(See "Selecting a Feed Amount Adjustment Method.")
2
Execute Adj. Quality or Adjust Length, depending on the selection in Adj. Priority.
(See "Automatic Banding Adjustment.")
(See "Manual Banding Adjustment.")
(See "Adjusting Line Length.")
3
After executing Adj. Quality, execute Adj. Fine Feed for further adjustment as needed.
(See "Fine-Tuning the Paper Feed Amount.")
Selecting a Feed Amount Adjustment Method
Selecting a Feed Amount Adjustment Method
Methods of adjusting the amount paper is fed are set in Adj. Priority.
Adjust Adj. Priority to suit your particular printing application.
Print Quality: Adjusts the feed amount to reduce banding across the sheet in printed documents.
•
Adj. Quality settings are applied. When Adj. Fine Feed is executed, the Adj. Fine Feed settings are applied
in addition to the Adj. Quality settings.
Print Length: Adjusts the feed amount for better accuracy of lines in printed documents.
•
The settings of A:High or B:Standard/Draft in Adjust Length are applied.
Automatic: Print Quality or Print Length is selected, depending on Print Priority as selected in the printer
•
driver at the time of printing.
Image or Office Document: Print Quality is selected.
Line Drawing/Text: Print Length is selected.
• Either A:High or B:Standard/Draft in the Adjust Length menu is applied, depending on printer driver settings at
the time of printing.
Note
• If you have selected Easy Settings in the printer driver, follow these steps to confirm the Print Priority setting.
• Windows: Click View Settings on the Main tab to display the View Settings dialog box.
• Mac OS: Click View set. on the Main pane to display the View set. dialog box.
Follow these steps to configure the settings.
1
Load the paper.
Attaching the Roll Holder to Rolls
•
Loading Rolls in the Printer
•
Loading Sheets in the Printer
•
User's Guide
P.483
➔
P.484
➔
P.485
➔
P.487
➔
P.487
➔
P.336
➔
P.339
➔
P.356
➔
Adjusting the Feed Amount
483