Canon imageprograf ipf780 User Manual page 319

iPF780
Setting
Fit Roll Paper Width
Scaling
• Borderless Printing
You can print the media without margins on all sides when the roll paper with the specific width and the specif-
ic media type is used.
• Available only if rolls are selected in Paper Source.
Note
• Paper Size
You can select the size of the print media.
• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
Note
• Print Centered
Select this feature to print the image in the center of a cut sheet or to print left and right margins evenly from
the edges of roll paper.
• This feature is useful when you print the document enlarged or reduced with Scaling as well. When an image
is scaled, it is always enlarged or reduced in reference to a starting point in the upper left corner of the page.
Note
If the image is reduced, the bottom and right margins are enlarged and the top and left margins remain un-
changed. At that point, you can set all margins evenly with this feature.
• No Spaces at Top or Bottom
You can set the printer to print without any empty area when the print data contains empty area at the top or
bottom. Since the printer does not feed paper over the empty area, you can save paper.
• Available only if rolls are selected in Paper Source.
Note
• Rotate Page
Select the method for rotating page.
The following settings are available for rotating page.
Setting
Rotate Right 90 Degrees
Rotate Left 90 Degrees
Rotate 180 degrees
User's Guide
*Make sure that the width of the roll paper in the printer is set correctly for Roll Paper
Width in the Paper Settings panel.
*Displayed only if rolls are selected in Paper Source.
Enlarges/reduces the whole page by the scaling rate as specified. Input the scaling value
in numerical characters. You can specify a range between 5 and 600%.
*You can change the numbers by clicking either ▲ button or ▼ button.
*Although Scaling can be set to make the image larger than the media size, the part that
does not fit in the media cannot be printed.
*This is not displayed when a checkmark is placed in Borderless Printing.
Rotates the portrait page right 90 degrees and print in landscape orientation. When the
rotated page can fit in the width of roll paper, the page is rotated automatically, and when it
can not fit in the width of roll paper, the page is not rotated.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then the im-
age is enlarged or reduced after rotating to fit the width of the roll paper.
Rotates the portrait page left 90 degrees and print in landscape orientation. When the ro-
tated page can fit in the width of roll paper, the page is rotated automatically, and when it
can not fit in the width of roll paper, the page is not rotated.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then the im-
age is enlarged or reduced after rotating to fit the width of the roll paper.
Allows you to rotate the image 180 degrees from the vertical to the right.
Output Settings Panel
Details
Details
319