Switching Off - Bosch Isio Original Instructions Manual

OBJ_DOKU-31309-001.fm Page 41 Thursday, July 5, 2012 3:50 PM
Fitting Pole Cart (grass shear only)
Align the grooves on the garden product with fixing on the wheel cart 10.
Plug in the handle connector 8.
Adjusting Handle Length (see figure C)
Loosen the adjustment collar 9.
Pull the telescopic pipe 8 out to increase the height, or push it in to
decrease the height.
Re-tighten adjustment collar 9.
Adjusting for Edging Mode (see figure D)
Turn the garden product 90 °, in either direction to position the garden
product in the vertical edging mode.
Operation
Switching On
Press the lock-off button 3 and hold while actuating the On/Off switch 5.
Release the lock-off button 3 again.

Switching Off

Release the On/Off switch 5.
Working Advice
Hold the garden product away from yourself. Stand in a secure and
stable position.
For more tips on cutting please refer to website www.bosch-gar-
den.com.
Cutting Hedges (shrub shear only)
Before cutting check the hedge for foreign objects e. g. wire fences.
Cut stems up to 8 mm in thickness. When cutting, move steadily along the
line of cut, so that stems are fed directly into the cutter blades. The double
edge of the cutting blade enables cutting to either direction, or with a side
to side motion.
Bosch Power Tools
English | 41
F 016 L70 473 | (5.7.12)