Loading paper and
other print media
To print on Photo (10 15 cm) or Photo L
(89 127 mm) paper, you must use the
photo paper tray. (See Loading photo
paper (DCP-J725DW only) uu page 15.)
Load only one size of paper and one type of
paper in the paper tray at any one time.
Pull the paper tray completely out of the
If the paper support flap (1) is open, close
it, and then close the paper support (2).
Downloaded from ManualsPrinter.com Manuals
Lift the output paper tray cover (1).
With both hands, gently press and slide
the paper side guides (1) and then the
paper length guide (2) to fit the paper
Make sure that the triangular marks (3)
on the paper side guides (1) and paper
length guide (2) line up with the marks
for the paper size you are using.